$3,140.00 $2,940.00 Inc GST

SKU: BL-5000EXT Category:






BL-5000EXT Car Hoist

The BL-5000EXT is our latest extended model for lifting cars and light trucks, with jack support locations farther apart than normal. Basically, it’s longer. The QuickJack is the best car hoist for your home garage or shop, and with the added reach of our new EXT models, you’ll be servicing more vehicles than ever. QuickJack EXT models are available in both 5,000 and 7,000-lb. capacities.



BL-5000EXT Portable Car Hoist System

Why did we develop the BL-5000EXT? Simple: the BL-5000SLX has a limiting lift point reach of 60”. That works for most vehicles, but there are vehicles whose manufacturer-recommended lift points are just an inch or two out of reach. Sounds like a small difference, but professional shops and smart DIY’ers know never to take chances with an off-balance load.

Enter the BL-5000EXT. Its 66” lift point reach is long enough for virtually every vehicle type out there (in the 7,000-lb. or less range). Many auto detailing and repair shops can’t fit a full-size car lift in their space, and there hasn’t been an industry response to meet these needs. We heard the community’s call and immediately went to work perfecting the EXT series. It’s our pleasure to introduce the world’s first professional-grade home car lift. Of course, commercial garages will get just as much use out of it.

Setup for the BL-5000EXT car lift is the same as it is for the SLX model. You still get 5,000 lbs. of lift, auto-locking safety bars, 30-second rise and one-touch button controls. Because we stretched our EXT models an extra 6” to accommodate some late-model cars, the overall frame length is also slightly longer. So, if you’re into Smart™ cars or other super-short wheelbase vehicles, be sure to measure first. If you are lifting standard vehicles with jack points a little closer together, we recommend the BL-5000SLX.


More about the BL-5000EXT Car Hoist:

Automatic safety locks
QuickJack is the only portable car hoist with dual-position safety locks that automatically glide into place. Flip off the lock bar and prepare for a safe, even descent.

Extended lift point spread
Lift block trays are extended 6” to allow operators to safely reach difficult lift points. Never compromise safety or “wing it.” Get the right car hoist for the job.

One-touch button control
The pendant remote control could not be easier to use. For your convenience, it magnetically attaches to the power unit chassis. Press Up or Down to activate the hydraulic system.

Built-in hydraulic flow divider
Every power unit that comes with the QuickJack portable car hoist system includes a hydraulic flow divider that ensures an even lift at all times. Fluid is distributed throughout both cylinders at equal pressures.

Features & Specifications:


  • 2,268 kg (5,000 lbs.) capacity
  • Extended length for long wheelbases
  • From stow to go in less than 60-seconds
  • Dual-position automatic safety lock bars engage automatically as the lift rises
  • Dual locking positions – mid level and full rise
  • Extended, cantilevered rubber block trays provide increased rubber block reach
  • Portable power unit features a remote push-button control for simple operation
  • Steel mounted UHMW wheels provide effortless rolling of jack frames on floor
  • Remote pendant control features a 13-foot cord
  • Power unit features a built-in hydraulic flow divider for precise equalized lifting
  • Open-center design for clear under car access
  • Quick-connect/disconnect hoses for fast and convenient set-up
  • Convenient handles allow for easy positioning of the jack frames
  • Strong 14-gauge welded steel frames
  • It’s a jack you can use when you need it then conveniently store out of the way
  • Provides quick wheels-free convenience for brake and tire service and clear undercarriage access of all types of vehicles
  • Low-profile jack frames fit under most race cars
  • Powerful hydraulic cylinders eliminate the need for screw mechanisms
  • Integrated power-assist canisters increase the lowering speed
  • Hydraulic cylinders feature integrated velocity-fuse safety valves
  • A convenient metal carrier with handle keeps the power unit protected and easily mobile
  • Includes an eight piece set of adjustable and stackable rubber lift blocks to support cars at precise locations for increased stability and safety
  • Detailed installation, maintenance and safety instructions accompany each QuickJack system
  • Durable powder coat finish





Lifting Capacity

2,268 kg (5000 lbs.)

(A) Minimum Collapsed Height

76 mm (3″)

(B) Platform Lifting Height (Frame only)

447 mm (17.6″)

(C) Platform Lifting Height (Small Rubber Block)

467 mm (18.4″)

(D) Platform Lifting Height (Tall Rubber Block)

487 mm (19.2″)

(E) Platform Lifting Height (Stacked Rubber Blocks)

533 mm (21″)

(F) Frame Width

278 mm (11″)

(G) Rubber Lift Block Position – (MAX)

1,676 mm (66″)

(H) Rubber Lift Block Position – (MIN)

951 mm (37.4″)

(I) Overall Frame Length

1,905 mm (75″)

Individual Frame Weight (ea.)

34 kg (76 lbs.)

Power Unit Weight

16 kg (35 lbs.)

Gross Weight

100 kg (220 lbs.)


45 dB



Reviews (0)


There are no reviews yet.


12.06.2020 - Dear customers, due to unprecedented demand all orders currently have a longer than usual processing time.

At the time your order was placed expected processing time was 1-2 weeks, plus delivery time.

Current processing times are approximately 3-4 weeks, plus delivery time (excluding any Pre-Orders or Web Only orders)

If you have any questions regarding your order, please email or call our Head Office on 1300 839866 during business hours.

Apologies for the lengthy delays. We thank you all for your increasing support and appreciate your patience.